Continental Fireplaces BCNV36N Istruzioni per gli Interventi Scaricare il pdf (Pagina 8)

W415-0861 / A / 02.10.11

3.0 VENTING

3.1 VENTING SAFETY SWITCH

WARNING

RISK OF FIRE, MAINTAIN SPECIFIED AIR SPACE CLEARANCES TO VENT PIPE AND APPLIANCE.

This is a vented appliance and must be connected to a chimney in accordance with the current installation

codes. In absence of local codes, install to the current CAN/CGA B149 in Canada or to the current National

Fuel Gas Code ANSI Z223.1 in the United States. This model can be common-vented.

A minimum four inch diameter (4" Ø) B-vent or class A vent is required. A minimum 10' vent height is required.

Secure the B-vent to the exhaust collar on the appliance top with 3 screws. In cold climates, the use of a B-

vent and an insulated chase is recommended.

Under extreme vent conﬁ gurations, allow several minutes (5-15) for the ﬂ ame to stabilize after ignition. Provide

a means for visually checking the vent connection to the appliance after the appliance is installed.

TAMPERING WITH THE SAFETY SWITCH CAN RESULT IN CARBON MONOXIDE POISONING AND

POSSIBLE DEATH.

WARNING

This thermally activated switch, located in front of the draft

hood, senses an increase in temperature and acts as a

safety shut-off, see "A". It shuts down the gas to the main

burner in the event of a severe downdraft of air or a blocked

or disconnected chimney ﬂ ue. If the ﬂ ue is blocked or has

no "draw", the safety switch will automatically shut off the

supply of gas to the main burner within 10 minutes.

This switch must be manually reset by depressing the

plunger.

PLUNGER

HI LIMIT

SWITCH

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Nessun commento

Continental Fireplaces BCNV36N Istruzioni per gli Interventi Pagina 8